Affordable Chimney Sweeps Adelaide
  • Home
  • About Us
  • Repairs / Replacement Parts
  • Specials
  • Wood Heater Installs
  • Contact
  • CHIMNEY CAPPING
  • GALLERY
  • FLUE INSTALLATION
  • 2026 WOOD HEATER RANGE
  • Eco-Friendly Fireplaces
  • SMOKELESS FIREPIT

OUR favourite WOOD HEATErs on the market 2026!

​ 
Call us today or fill out the form below 😊

We are not a physical store
​at this stage,
but there's a good reason for this...
​
We work with you from start to finish, we don't just sell you a wood heater and give you a card for an installer, we do it all.
Its the personal approach that's makes us a unique company.

Check out our favourite, easy to get wood heaters below.

**Also check out the new 'INSULATED flue kits' we can now supply**
these are fully insulated and completely stainless steel with 10 year warranty.
​
ask us today about it!

Kalora 425R

A$1,099.00 A$1,049.00

The Kalora 425R is our radiant model and is ideally suited for small

indoor and undercover outdoor living spaces and is also protected by

a 15 year firebox warranty.


  • Heats up to 140m2
  • Radiant cooktop
  • 15 year firebox warranty
  • Firebrick lined back, side and base.
  • Efficiency 63% Ave.
  • Emissions 1.5g/Kg


*Price does not include the flue kit or installation, contact us today about those.


Shop

Kalora 500C

A$1,995.00

Kalora’s mid size fan forced convection wood fire has been designed and engineered to efficiently heat homes up to 200m2. Minimal clearance requirements also make it a great choice for homes where space and proximity to combustible items presents a challenge.


  • Heats Up To 200m2
  • Incredibly Low Emissions 1.1 g/kg
  • 8 mm Heavy Duty Steel Baffle Plate 
  • 5.5mm Steel Firebox With 15 Year Warranty
  • Average Efficiency 67%
  • Three Speed Fan
  • Oak finish handles 
  • 158 kg Gross weight
  • Next size up - Kalora 600C (Heats up-to 300m2) @ $2,499


Clearances:

Rear Wall 125mm

Corner Wall 100mm

Side Wall 250mm

Hearth 450mm

Shop

Kalora 500BX Woodstack

A$2,295.00

Kalora 500 Woodstack


Get the same amazing performance and quality you expect from a Kalora 500 with the added advantage of a wood storage pedestal, ideal for those nights when it is just too cold to go outside for more wood!


  • Heats up to 200m2
  • Low emissions 1.1g/kg
  • 8mm heavy duty steel baffle plate
  • Average efficiency 67%
  • Firebox space (mm) 445 x 300 x 280
  • Three speed fan control
  • Large wood storage
  • 15-year firebox warranty


CLEARANCES


Rear wall 150mm

Side wall 250mm

Hearth 450mm

Corner wall 100mm


Next model up '600BX Woodstack' @ $2720.00 (Heats up-to 300m2)


*Flue kit and installation not included in the price - Ask us today!

Shop

Kalora Fusion

A$3,095.00

Fusion is the result of the synergy that can be achieved when you combine the features of a modern high performance wood heater with the nostalgic feel and benefits of a traditional wood fired stove.


  • Heats up to 200m2
  • Large bakers oven
  • 8mm heavy duty steel baffle plate
  • 5.5mm heavy duty steel firebox
  • Hot water jacket optional - RRP $370
  • Firebox space (mm) 435 x 320 x 355
  • 15-year firebox warranty
  • 246kg Gross weight
Shop

Kalora Accent Built-In

A$1,995.00

The Kalora inbuilt wood heater range has been specifically designed for installation into existing masonry fireplaces overcoming the inefficiencies associated with traditional open fires such as excessive fuel burn, uncontrollable heat levels and energy that is lost straight out of the chimney.



The Kalora inbuilt range also accommodates for those who love the look of an inbuilt wood heater but do not have an existing open fireplace. Our zero clearance solutions avail the opportunity to install the Kalora Accent into a timber-framed wall with the need for only minimal clearances. Speak to your local Kalora dealer for assistance on the right inbuilt solution for the heart of your home.


  • Heats up to 280m2
  • Low emissions 1.4g/kg
  • 8mm heavy duty steel baffle plate
  • 5.5mm heavy duty steel firebox
  • Average efficiency 61%
  • Firebox Space Height: 414mm x Width: 601mm x Depth: 355mm
  • 15-year firebox warranty
Shop

Eco-Choice WS18

A$3,295.00

Australia’s most efficient wood burning stove!

The Eco-Choice WS18 medium-size wood-burning stove delivers warmth and comfort to your home, while being easy to operate and maintain. The durable steel construction and brick-lined firebox ensures the WS18 will deliver heat for years to come.


Standard Features:

  • Up to 210m2 heating capacity
  • Up to 86% heating efficiency (One of the most efficient wood heaters)
  • Up to 12 hours burn time
  • 1.3 grams/kg emission
  • 145Kgs Gross weight
  • Fan (optional $399)
Shop

Eco-Choice WS22

A$3,549.00

Australia’s most efficient wood burning stove.


The Eco-Choice WS22 large wood stove combines dependability with value. The WS22 features a wide door opening with single-lever operation and an air wash system to keep the glass clean. This simple design, plus quality you can see and feel, will deliver warmth and comfort to any room of your home.


FEATURES:

  • 30 Squares or 278m2 heating capacity (American measurement)
  • Up to 84% heating efficiency
  • Up to 12 hours burn time (Most Efficient On The Market)
  • 1.2 grams/kg emission
  • Optional fan $420
  • ONLY 75mm Off Corner Combustable Walls
  • 185Kgs


CLEARANCES:

Hearth Clearance 457mm

Rear Wall Clearance 178mm

Side Wall Clearance 229mm

Corner Clearance 76mm


*We can also sell and install flue kits to go with this heater

Shop

Eureka Opal

A$3,045.00

The Opal Series 2 woodheater is efficient, rugged and powerful. It is produced for the budget conscious buyer who wants maximum heating capacity for their dollar.

The heater features a large door, a powerful three speed fan and a firebrick lined firebox.


Features:


  • Heats up to 180m2
  • Powerful, Three Speed Fan
  • Firebrick Lined Firebox
  • Clean Glass Door During Normal Burning (Self-Cleaning)
  • Heavy Duty Removable 8mm Thick Steel Sacrificial Baffle Plate
  • Deep Ash Bed For Convenient Ash Retention.
  • Strong welded seam and folded 5mm firebox.


CLEARANCES


  • 150mm from a rear wall
  • 300mm from a side wall
  • 100mm from the corners
Shop

Eureka Pearl Freestanding

A$4,675.00

The very latest in design and technically advanced wood heater achieving a remarkable 80% in efficiency.

Stylish, modern & innovative designed and manufactured in Ararat. 


Features:


  • High output and efficiency combined with low emissions.
  • Heating up to 260m2
  • Sleek and modern design features utilising the latest in manufacturing technolgy.
  • Full glass fronted door for maximum viewing area.
  • 6mm fully welded steel firebox with a dual pre-heated primary air chamber.
  • 3 speed powerful fan with thermostatic control.
  • Slim line and robust pedestal base.
  • Compact dimensions and clearances for ease of installation.
  • Cast iron firebox liners to ensure maximum firebox heat retention and efficiencies.


Dimensions:


Height: 765mm

Width: 690mm

Depth: 548mm

Weight: 203kg

Emissions: 0.9g

Efficiency: 80%

Output: 16kw


Hearth Specifications:


Hearth Type: Full

Solid Flue: W945mm D1000mm T9mm (300mm in front of unit)

Solid Flue Rear Wall: 155mm, for perf. 50mm* (* denotes standard flue shield required)

Solid Flue Side Wall: 325mm

Solid Flue Corner: 50mm

Shop

Eureka Bulit-In (Opal)

A$3,100.00

Opal, Stockade and Garnet Insert wood heaters are a contemporary design to suit many homes. Choose between the small, medium or larger capacity heaters which can be installed off the floor in a Zero Clearance application or into a fireplace. 


  • 3 Speed Fan
  • Firebrick Lined
  • 8mm Steel Baffle Plate
  • 10 Year Firebox Warranty
  • Zero Clearance Compatible
  • Australian Made (like ALL their wood heaters)


Shop

Eureka Pearl Insert

A$4,915.00

This tradition continues with the latest range of wood heaters that conform to the strict Australian emission levels. For many years Eureka wood heating has been the pre-eminent brand in the Australian market place for wood heating based on quality, strength and prolonged high performance.


Features

  • Sleek And Modern Design
  • 3 Speed Fan
  • Cast Iron Lined
  • 8mm Steel Baffle Plate
  • 10 Year Firebox Warranty
  • Dual Pre-Heated Primary Air
  • Dual Action Handle Latch
  • Thermostatic Fan Control
  • $6500 For Wood Heater, Zero Clearance Box and 4m Triple Skin Flue


Dimensions

Capacity: Up to 240m2. 

Facia Height: 674mm

Facia Width: 850mm

Facia Depth: 3mm

Weight: 256kg (heavy)

Emissions: 1.0g

Efficiency: 74%

Output: 12kw


*This wall pictured above, from start to finish, including: Frame, wood heater and zero clearance box, triple skin flue and installation, flushing, timber mantle, staining and painting works out to be around $10,500. A job like this takes a full day to install and another half a day for painting.

Shop

VisionLine Air Flue

A$1,500.00 A$1,350.00
Designed in Europe for high efficiency homes, the VisionLINE air flue is crafted with the highest quality materials and packed with state of the art technology, enhancing your fire while maintaining indoor air quality and efficiency.


VisionLINE Air Flue Approval number to AS/NZS 2918 2018 Appendix F is ASFT20032 Issued on 3rd April 2020


The Visionline air flue system is a co-axial, room sealed insulated flue system for freestanding solid fuel slow combustion heaters. It is designed to increase the performance of slow combustion heaters and increase the efficiency in the home when compared to a typical air cooled default flue.


For in the room;
The stove pipe inner section is made from double walled seam welded 316 stainless steel re-inforced by .5mm carbon steel with a powder coated and seam welded 304 outer casing.


This triple skin Stove pipe promotes a better draft and lower outside temperatures than typical solid twin skin systems with less extreme heat spots and discolouring.
It also features a clean line 80mm ceiling ring that is installed flush with your ceiling plaster with matching powder coat, what you see in the home is all class and high quality. This room sealed stove pipe and ceiling ring combination means the heat being generated from your fire isn't being lost through the flue system to keep it cool.
The stove pipe has 3 main sizes available including a slip piece to get the connection just right for every installation.


For fireplaces that have an outside air intake the visionline air flue connects to it via a T-section and adjustable snorkel. If your fireplace has a co-axial outside air connection, the Visionline Air flue stove pipe plugs straight in.


For above the ceiling;
The safety vent sections of flue feature a double walled active flue which is protected by 2 layers of insulation, an air gap and then a further outer wall for the optimum in fireplace safety.


All safety vent sections feature a tough twist locking mechanism that compresses each join to create a strong lock and super tight seal further promoting good draft.
After the ceiling penetration there's 2 roof brace supports that are installed within the ceiling cavity to take the weight of the flue. This enables the flue outside the roof cavity to installed with no additional bracing for up to 3 metres.


For above the Roof;


The cowl is constructed from full 316 stainless steel and is powder coated for the ultimate in protection. The cap has a full brim designed to reduce water intrusion from rain or condensation and the underside cowl cover has an extended wind skirt shield to reduce turbulence to the air intake. This innovation has been known to fix the symptom of a whistling dropbox in air cooled default flue systems during high velocity wind.


There is also an added mesh layer to limit unwanted bird access together with a protective wind rim to reduce the effects of downdraft to the fire.


Approval standards
The Visionline air insulated flue system has been tested to AS/NZS 2918 2018 appendix F and is considered default. This means it can be installed on any slow combustion heater that is approved for sale within Australia. It is also the only insulated flue system in the Australian with CE-EN-NO 1856 certification which covers tensile strength, compressive strength testing, Wind Load testing, Aerodynamic performance of termination under wind tunnel and gas tightness from unit to termination.


*Snorkel for outside air adapter $500
Shop

Room Seal Flue Kit (Premium Flue Kit)

A$1,300.00

Designed in Australia, the Insulated Room Sealed Flue Kit is the latest innovation in Flue Technology. Based on designs used throughout Europe and Canada, this twist lock is perfect for any new home wishing to have a wood heater. Sealed to the room, this flue keeps 8% more heat inside than traditional air-cooled flue kits, which keeps you warmer and saves you money on wood.


The Insulated Room Sealed Flue boasts a simple yet effective design. The 150mm interior active flue is made from stainless steel, with 50mm of ceramic insulation wrapped around it. The insulation is the covered by the outer casing, a 200mm stainless steel pipe. Both ends are then sealed, with a male and female twist on either end which creates the twist lock joint. With the flue fully sealed, there are no loose pieces of ceramic insulation, meaning it is completely safe to handle, unlike insulated flue from the old days.


*Price is for Standard 4m Room Sealed Flue Kit.


This flue kit is technically made to measure, so extra lengths or elbows can be easily added to the total.

Shop

VisionLINE Taurus

A$5,995.00

A feature rich slow combustion unit, the VisionLINE Taurus unit encompasses style and class with efficient, radiating heat. The rectangular fireplace is distinguished by its high-quality materials and is offered in 3 different models, melding into any space with ease. Accompanied by a large heating capacity and long burn times the VisionLINE Taurus unit will emanate warmth and sophistication, transforming any space with its sleek and modern design.


KEY FEATURES:


  • 50mm Firebrick Baffle
  • Heavy Duty Steel Construction
  • Large Heating Capacity: Up to 300m2
  • Long Burn Times: Up To 12hrs*
  • Large Full Glass, Self Closing Door
  • Emissions: Low – 1.3g/kg
  • Warranty: 10 Years Firebox Warranty


Available configurations:

  • Freestanding (with fan and heat shield option)
  • Zero Clearance (Installation Into Timber Stud Frame: Zero Clearance Box, 4m, Triple Skin Flue Kit
  • Insert Into Brick Fireplace
  • Wood Stack Pedestal
Shop

Nectre N15 (Legs, Pedestal, Woodstacker)

A$1,595.00

The Nectre 15 is simple, classic and compact but offers an impressive radiant heating capacity of up to 160m2. The Nectre 15 is the perfect choice for adding some wood fire magic to any corner of the room



  • Tiny footprint that provides remarkable heating output
  • Firebrick lining to improve thermal mass
  • Cool spring handle
  • Side shields $310 a set for the legs and $350 a set for the stacker
  • Great for flat wall install, not the greatest for a corner wall install with gyprock walls (contact us to discuss)
  • Cooking Trivet option $130
  • Also available in pedestal ($1745) or wood-stacker ($2095)
Shop

Flue Kits and Accessories

Room Seal Flue Kit (Premium Flue Kit)

A$1,300.00

Designed in Australia, the Insulated Room Sealed Flue Kit is the latest innovation in Flue Technology. Based on designs used throughout Europe and Canada, this twist lock is perfect for any new home wishing to have a wood heater. Sealed to the room, this flue keeps 8% more heat inside than traditional air-cooled flue kits, which keeps you warmer and saves you money on wood.


The Insulated Room Sealed Flue boasts a simple yet effective design. The 150mm interior active flue is made from stainless steel, with 50mm of ceramic insulation wrapped around it. The insulation is the covered by the outer casing, a 200mm stainless steel pipe. Both ends are then sealed, with a male and female twist on either end which creates the twist lock joint. With the flue fully sealed, there are no loose pieces of ceramic insulation, meaning it is completely safe to handle, unlike insulated flue from the old days.


*Price is for Standard 4m Room Sealed Flue Kit.


This flue kit is technically made to measure, so extra lengths or elbows can be easily added to the total.

Shop

4m Decro Mesh or Solid Black Flue Kit

A$650.00

Perforated Double Cased Flue Kit with Triple Skin



Kit contains:

  • 2 Lengths Perforated or Solid Black Flue
  • 4 Lengths Stainless Steel Inner Flue
  • 2 Lengths Galvabond Inner Flue Casing
  • 2 Lengths Galvabond Outer Flue Casing
  • 1 Stainless Steel Wind Cowl
  • 1 Ceiling Box
  • 1 Ceiling Box Flange
  • 1 Locating Ring
  • 2 Angle Support Brackets



Stainless Steel 304 Grade 0.55

Shop

Black Ceramic Tile Hearth - 1050mm x 1050mm

A$530.00
  • Thermal protection for your floor
  • Straight wall installation
  • Lay directly over carpet or timber floor


This hearth pad is intended for use in a straight wall installation and suits many generic makes and models of wood heaters.



Also come in other sizes:

1200mm x 1200mm @ $559

1425mm x 1425mm @ $649

Corner hearth 1250mm x 1250mm @ $600

Shop

Heat Powered Fan

A$110.00 A$75.00
  • No Batteries or Electricity required - - The stove fan uses heat from the stove surface to spin, adjust its speed automatically with the stove surface temperature. 
  • 4-blade, large air volume, disperses hot air around room; promotes air circulation effectively. 
  • Reduce the fuel consumption and make the room warmer quickly. 
  • Whisper-quiet, low noise, environmental protection. 
  • Made of upgraded alumunum material, CE and POHS certificates, quality guaranteed.
Shop

    Wood Heater Enquiry

Submit

Affiliated with...

Picture

©Affordable Chimney Sweeps 2015 
​BLD 322643

  • Home
  • About Us
  • Repairs / Replacement Parts
  • Specials
  • Wood Heater Installs
  • Contact
  • CHIMNEY CAPPING
  • GALLERY
  • FLUE INSTALLATION
  • 2026 WOOD HEATER RANGE
  • Eco-Friendly Fireplaces
  • SMOKELESS FIREPIT